Largest Selection Of Bamboo Slats Anywhere. Now Sold In 1.75 Wide in 6ft & 8ft lengths. Bamboo Slats Are Sold In Bundles Of 25 & 50.

Bamboo slats are processed from bamboo shoots and prepared into beautiful accent pieces for furniture and countertops. Bamboo slats trim picture frames and mirrors. They are used for chair rails and wall dividers. Entire Tiki bars are made from bamboo slats. Bamboo slats are sold in their natural honey color or stained mahogany, natural black and smoked. They are sold in a standard size of 1.75-inches by 6-feet & 8-feet long but can be cut to size. Bamboo slats are installed using screws inserted into pre-drilled holes or are nailed through the nodes using pneumatic nail guns. Also you may use a floor adhesive.

How to cut:

Measure the area you wish to use the bamboo slat for. If it is to trim a countertop edge, mark the measurement for cutting. If the slat will be used the full length of a ceiling, you might need to leave the full size. The nice thing about bamboo slats is they are easy to cut.

Step 2. Set up a table saw in a roomy area, you will need room on both sides of the saw to accommodate the 6 to 8 foot slats.

Step 3. Plug in and turn on the table saw. Hold both sides of the bamboo slats securely with your hands.

Step 4. Push the bamboo slat into the saw blade at the mark on your slat. Keep your fingers out of the way of the blade.

Step 5. Keep the bamboo slat straight to ensure that your cut is straight. Cut slowly to avoid making a mistake.

1-866-944-TIKI (8454) or 1-951-688-5658